The MAX-4 Pallet System

Bring the productivity of high-density palletized workholding to your 4 and 5 axis applications. The MAX-4 (Multi-AXis) Pallet system allows for more parts per cycle, fewer tool changes, and maximum productivity. The fail-safe design is unlocked using compressed air and the locking action is spring powered with over 15,000 lbs of retention force.

MAX-4 Pallet System
Starter Package

  • One MAX-4 Base
  • One Connection Kit
  • Four Pallets of your choice:
    • Four 2″ H x 5.9″ Dia pallets
    • Four 6″ H x 5.9″ Dia pallets
    • Two 2″ H x 5.9″ Dia and
      Two 6″ H x 5.9″ Dia pallets

Starter Package starting at

$2,650.00

Customize & Buy!

MAX-4 Base

The MAX-4 Pallet System Base is the perfect foundation for advanced 4 and 5 axis palletized workholding. Out of the box, the MAX-4 Base bolts to rotary units with 4 or 6 t-slot platters as well as 140mm bolt hole patterns. A 96mm pull stud pattern is an additional mounting option. The system is air actuated to release pallets and spring powered for the locking action. This means pallets stay securely locked even with no air to them. A center and side air inlet allow you to customize the setup for center bore or side plumbing.

Base Features

  1. .0002″ repeatability due to the self-centering quad taper design
  2. Hardened stainless contact pads ensure excellent wear resistance
  3. 15,000 lbs of retention force and a fail-safe system that only uses air to release pallets and spring powered to lock pallets in place
  4. Wide mounting flange for 4 and 6 bolt interfaces

MAX-4 Base – $1,895.00

Add to Cart

MAX-4 Pallets

Two pallet sizes of 2″ x 5.9″ and 6″ x 5.9″ locate on the MAX Base with .0002″ repeatability due to the tapered, self-centering geometry. 6061-T6 Aluminum assures easy machinability. All locking surfaces are hardened stainless steel. The tops and sides of these standard pallets are blank and ready to customize.

Pallet Features

  1. 6061 T6 Aluminum for easy fixture creation
  2. Hardened Stainless Steel Locking Insert

Pallet Sizes: (H x D)
2″ H x 5.9″ Dia – 5.9 lbs (51mm x 150mm – 2.7kg)
6″ H x 5.9″ Dia – 16.6 lbs (152mm x 150mm – 7.5kg)

Accessories

Hardware Kit

If you’re looking for a custom sized pallet or just want to make your own, this kit contains all the necessary components to build it yourself. The hardened stainless steel Locking Alignment Insert is secured using 4 dowel pins and 8 socket cap screws (1/4-20 thread). The kit includes PDF and STEP files available for download immediately after an order is placed.

MAX-4-HW – $95.00

Add to Cart

Rotary Union

Use our Rotary Union to reduce chances of twisted airlines that can create an unsafe condition. This low-speed, low-friction, high-pressure rotary union routes airlines through the center bore of 4th axis rotary units. It is a plug and play integration with the MAX-4 Base which has an 1/8-27 NPT center tapped inlet. Install using a 5/32″ hex wrench through the center.

  • 28 inHg vacuum to 150 psi compressed air
  • 100 RPM (600 deg/sec) max

RU-18 – $155.00

Add to Cart

Connection Kit

  • Hand Valve w/ Table Mounting Bracket
  • Air Lines (20′)
  • All Necessary Fittings

This connection kit gives you peace of mind ensuring you’ll have all the proper components to be up and running within minutes of opening the box. Plus, only one hand valve is needed to operate multiple bases when chained together. Kit is included in Starter Packages.

MAX4-Connection – $95.00 USD

Add to Cart

Visit our online store
for more accessories

Visit the Online Store

FAQs

While the RotoVise Pro focuses on enhancing 4th axis machining productivity with its multi-face access and compact design, the MAX-4 Pallet System aims at maximizing part density and minimizing idle time for both 4 and 5 axis machines. The MAX-4's single pallet is best for quicker changes for smaller, multi-face parts while the RotoVise Pro excels in vise or pallet applications, albeit with longer part change times.

The repeatability of the MAX-4 System is .0002" or greater. In most rotary applications, the best repeatability is more dependent on the accuracy of establishing the setup's origin, the center of rotation, and the condition of the rotary unit itself.

In short, very rigid. The MAX-4 Base is intended to be bolted down with 4 or 6 bolts depending on the style of the rotary platter. Compared to other zero-point systems, the MAX-4 Pallet's locking hardware is secured to the pallet with eight 1/4-20 screws on a 3.2" diameter pattern rather than relying on the thread of a single pullstud.

Yes. We sell a hardware kit to make your own pallets. The kit comes with the higher complexity/accuracy lock ring, hardware and downloads to make your own pallet.
Toolpaths needed are pocketing, reaming and tapping of any material you prefer.

All of our products can be purchased directly through us. This allows us to establish a close relationship with our customers and provide the best applicaton advice possible. Click here to order online or give us a call to place an order at (800) 352-2894. We accept all major credit cards and company checks.